FrontHandlebars, F forks, headlights, etc.

【Front Wheel】

“H-shape aluminum rim SR Front, one size up“

◯The hub and brake panel are polished, and the rim is a high-precision RK. The rim width is one size larger than the standard rim, which increases rigidity and provides a high accent effect.

“2%er Front Wheel Aluminum Hub Cap Starburst Type [SR400/500]“

◯Easy to install by just sticking it on, it makes your wheels unique.

【Headlight】

“7 inch Lucas Type Headlight Case Black“

〇A standard 7-inch diameter, bullet-shaped headlight case for cafe racer style.

“British Lucas Genuine Headlight Lens“

◯The headlight is positioned at a not too high position with the headlight stay of Peyton Place.

【Handle】

◯The handle is a Tomazeli Commander. It’s a part with a highway racer-like “naughtiness”. It’s attached extremely tightly because of the slim tank. This time, we deliberately did not use the “Ace Bar”.

“2%er Top Bridge Ⅰ for separate handle [SR400/500]“

〇A classic style top bridge without holes for the bar handle.

“Amal type slot wire 800mm ’88~’08“

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Front Blinker】

” Small Rubber Winker Orange 4pcs Set “

◯ A blinker with a rubber body that excels in shock resistance. It is inconspicuously installed with a one-off stay in front of the chrome-plated engine hanger.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off Pipe Manufacturing Exhaust Pipe Flange Set”

〇An exhaust pipe that runs under the belly of a one-off, using a convenient manufacturing kit for the mouthpiece at the root. A 4-inch aluminum super trap that was lying around in the shop will peek out a little from under the step.

【Step】

Mid-High Step Kit Chrome for SR400/500

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Carburetor】

◯At 2%ER, we recommend the FCR, but this vehicle has been equipped with a CR carburetor.  FCR Carburetor↓

『FCR carburetor 39φ SR400/500 single unit』

【Seat】

◯The seat cowl is a used item. I reupholstered the seat surface and used it after mounting work.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit made in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, it is welded and installed under the left side of the seat.

【Gasoline Tank】

◯The gas tank is a used one made by GOODS. Normally, I don’t use FRP tanks, but it was a good match for this vehicle, so I used it.

【Kick Pedal】

“Groove Kick Pedal“

◯A bolt-on lineup using dead stock parts for Harley.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Wheel】

“H aluminum rim SR rear, one size up“

◯ The rear wheel, hub, and brake panel, which are a major visual accent, are polished. The tire is GT501. The grip is moderate, but it’s a smart and tough-looking tire.

“Drilled plate torque rod SR400/500“

〇 It’s a drilled design torque rod to avoid interference with the wider tire.

【Rear Shock】

“280mm G-Suspension”

●A rear shock that lowers by about 4cm. It moves well among low-down suspensions.

【Rear Blinker】

” Small Rubber Winker Orange 4pcs Set “

◯ A blinker with a rubber body that excels in shock resistance.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇An affordable and durable replacement sprocket.